Plastic Omnium attended the 65th Frankfurt International Automobile Show

From September 12 to 22, our automotive divisions were participated at the IAA in 2013 to present their latest innovations.

INNOVATING FOR A BETTER FUTURE

It is under the banner of “Innovative for a better Future” that POAE and POAI presented show their innovations that address current auto industry demands to make vehicles lighter and cleaner.

Plastic Omnium Auto Exterior presented in particular the all-plastic tailgate for the Peugeot 308, which is being unveiled for the first time and heralds a new generation of rear opening modules.

Among several technologies, Plastic Omnium Inergy presented the TSBM* process for manufacturing fuel tanks, which is now used to equip small vehicles like the Mercedes A, B, CLA and GLA.

* Twin Sheet Blow Molding, a technology that enables equipment to be integrated into a fuel tank interior during the blow-molding process.

Share ...

Plastic Omnium introduces the first entirely thermoplastic rear-opening module for the new Peugeot 308

Plastic Omnium has launched production of its first all-thermoplastic rear-opening module to equip the new Peugeot 308.

Designed at ?-Sigmatech and produced in two plants in France – Langres and Fontaine, the tailgate weighs 12 kg, or 3 kg less than the same product made of steel. In addition, the new tailgate offers carmakers greater freedom of design and is entirely recyclable.

Share ...

Grand opening of a new Plastic Omnium Inergy plant in Huron, USA

On October 15th, Plastic Omnium had celebrating the grand opening and inauguration of a new Plastic Omnium Inergy plant in Huron, near Detroit.

This new facility will employs 400 skilled manufacturing and administrative workers, and will produce approximately 1.5 million plastic fuel tanks each year. Plastic Omnium Inergy has today three site in Michigan: Troy, Adrian and Huron.

Share ...

Growth continues strong in Third-Quarter 2013

The sharp increase in revenue in third-quarter 2013 confirms the rise reported in the second quarter of the year.

Open pdf file

Share ...

Grand opening of Plastic Omnium Automotive Development center in Slovakia

Plastic Omnium has opened a development center in Lozorno, Slovakia, for its exterior and structural components operations.

Open pdf file

Share ...

The Langres plants celebrated their 50th anniversary!

On September 28 and 29, the Langres plants celebrated their 50th anniversary.

This ceremony celebrated both the starting point for the great Plastic Omnium adventure, with the creation of the first Group plant in record time, and the importance of Plastic Omnium for the local community.

A celebration bringing together current and past employees.

A series of events were organized over these two days. The ceremony began by the inauguration of a square in the town center dedicated to Pierre Burelle, the Founder of the Group, and the presentation of the hall of painted ceilings in the Denis Diderot museum renovated thanks to the Plastic Omnium’s patronage.

Then the celebration brought together current and past employees of the Langres plants, and an open-door day allowed the families to become better acquainted with our professions.

Share ...

Plastic Omnium awarded for its Industrial Excellence by PSA Peugeot Citroën

Last June, Plastic Omnium was awarded by PSA Peugeot Citroën for its Industrial Excellence at its ninth annual Supplier Awards.

This award recognises Plastic Omnium Auto Exterior, and particularly the French plant of Vernon, for its performance in terms of continuity, strategy, quality, logistics and continuous improvement in industrial processes.

The award was presented to Eric Auzépy, President of Plastic Omnium Auto Exterior during the ceremony hosted by Philippe Varin, PSA Chairman, Yannick Bézard, Purchasing Director, and the members of the board of directors involved more than 120 suppliers, of whom 23 were recognized for their achievements throughout 2012.

Share ...

Plastic Omnium at the 65th Frankfurt International Automobile Show

Number one worldwide in exterior automotive components and fuel systems, Plastic Omnium is participating in IAA 2013, the 65th Frankfurt International Automobile Show, …

Open pdf file

Share ...

Three-for-one stock split on 10 September 2013 at start of trading on the Paris stock exchange

In accordance with the decision of the Extraordinary Shareholders Meeting of 25 April 2013, Plastic Omnium will proceed with a three-for-one stock split at the start of trading on 10 September 2013.

Open pdf file

Share ...

Plastic Omnium introduces the first entirely thermoplastic rear-opening module for the new Peugeot 308

Plastic Omnium has launched production of its first all-thermoplastic rear-opening module to equip the new Peugeot 308. Designed in the ?-Sigmatech research and development center in Lyon and produced in …

Open pdf file

Share ...

First-half 2013 Results

The Board of Directors of Compagnie Plastic Omnium met on 23 July 2013 under the chairmanship of Laurent Burelle to approve the consolidated financial statements for the six months ended 30 June 2013.

Open pdf file

Share ...

Gennevilliers (Hauts-de-Seine, France) Services Center equipped with 7 natural gas trucks

Concerned with providing answers to the increasing requirements of the local communities in terms …

The first agency launch this approach is the Gennevilliers service center. Out of seven vehicles, five are totally dedicated the “Ville de Paris”.

Compared to vehicles using Diesel motors, there are many benefits: noise reduction for a better comfort of the citizens, reduced impact on the environment, emissions of particles almost noexistent and less than 10% of CO2 emissions less.

Share ...

OptiSolutions: integrated hardware systems and software solutions for waste management by Plastic Omnium

The costs of the waste management are constantly increasing. The social actors have today to meet the challenge of the active management of the wastes in the interest of ecological coherence, fail-safe and economic.

With OptiSolutions, Plastic Omnium and its subsidiary Envicomp have developed a full range of equipment and IT solutions dedicated to collect and manage data linked with waste containerization and collection.

With OptiSolutions, municipalities will face the challenges of modern recyclable collection: improve waste sorting and optimize waste collection. From containerization equipment to data management but also geolocation of the waste collection vehicles.

Share ...

Some play spaces in 100% vegetated plastic

LUDOPARC, a Plastic Omnium Environment subsidiary, launches on the market the first play area in 100% vegetated plastic.

Developped together with the Plastic Omnium teams in the Research and Development center ?-Sigmatech of la Plaine de L’Ain, next to Lyon, one the one hand, and LUDOPARC in Saint-Etienne de Tulmont (France), on the other hand, the use of “100% Green Made” matter divide by more than six the CO2 emissions, compared to the use of HPL (High Pressure Laminate), those emissions are divided by more than eight.

Thanks to this technology, the pay spaces are 100% recyclable, and offer the very same technics characteristics as the whole actual LUDOPARC’s range of product.

The first ranges concerned are the Evoludo, Etnik, Ludeco and Chlorophylle. They straight away represent 50% of LUDOPARC Production.

Share ...